Page 6 - Arrow Shark Formula-X Owner Manual

First install both ball bearings into the
middle barrel, one at top, the other one
at bottom, insert the center shaft via
both bearings from the top, install the
gear pin onto the bottom end of the
shaft, match the slot in the gear with
the pin in the shaft, then press the gear
into the shaft, secure the gear in place
with the supplied washer and
Countersunk bolt.

Note: the countersunk bolt that secures
the gear in place must applied with
high strength Loctite 272.

A: Middle Shaft
B: Gear Pin
C: Gear
D: Countersunk bolt & Washer
E: Barrel Securing Bolts
F: Top Bearing
G: Middle Barrel
H: Bottom Bearing

Match the center barrel gear assembly into the center
hole of the lower unit, secure them together with
supplied two countersunk bolts.

6