Page 14 - Arrow Shark E-Starer V4 Owner Manual

Plum Coupling Correct Installation

No matter what brand engine mount or flywheel you use on your gas engine, after you complete the installation
make sure the gap between the plum coupling is no larger than 1mm. (you can use additional spacers if the gap
is not reach requirement), They should be a tight fit in order to protect the softer adaptor from damage. The
softer adaptor could be the part you need to replace once in a while, and you can purchase this part from our
website. When you install the new softer adaptor to the coupling, make sure you apply some grease or oil on
both the softer adaptor and the metal couplings in order to help you push them together easier.

Counter-Rotation E-Starter V4 Set up

14