Page 11 - Arrow Shark TS760-Marine Owner Manual

Electric Motor Position Adjustment

The electric motor position on the TS760-Marine
is designed to be fully adjustable; it could be
adjust up and down to best adapt into your hull
with hatch on, it could also to be installed on
either the carburetor side or the exhaust side with
very limited space needed. It is therefore likely to
be able to be installed into any RC gas boat that is
available in the market.

Just simply loose the four bolts on the
motor plate, and adjust the motor position
by rotating the plate. When positioned as
required, tighten the 4 bolts and re-install
everything. Make sure you apply loctite on
these four bolts when you tighten it back.

11