| [Manufacturer] | Arrow Shark |
| [Product Version] | Ultra-Jet Booster-X Thrust Angle Tuner |
| [Brief Description] | This Booster-X is specially designed to maximized the Ultra-Jet performance, it is constructed and manufactured using the latest 3D printing technology and carbon fiber composite materials, making it both high strength and lightweight.
The Booster-X allows you to manually adjust the thrust angles by 10 degrees in both up and down direction, enabling the fine-tuning of the center of gravity (CG) for optimal performance, typically, the CG is changed when using a different power-system and normally the more powerful motor results position the CG closer to the bow, without proper CG adjustment, the boat will exhibit excessive bow lift or oscillation while in operation. In this case, instead of adding Unnecessary counterbalance weights into the boat, the booster-X nozzle can simply be lowered a few degrees to stabilize the boat. If the boat is more difficult to plane when using a less powerful motor, similarly, the nozzle can be raised until the desired performance is achieved. With proper thrust angle adjustment, the maneuverability of the boat will also be improved, making precise turns and high speed operations easier in various water conditions. The Booster-X comes to your assembled, but you will need to little modification on the steering nozzle of your Ultra-Jet drive, please view the modification detail at pictures in above page. |
100%
NAN%
NAN%
This site is protected by copyright and trademark laws under US and international law.
all rights reserved ©2019-2029 Arrow Shark Inc
Most helpful comments（0）
No comment-