| [Manufacturer] | Arrow Shark |
| [Product Version] | SRD-2V Stingary Drive |
| [Product Weight] | 215 Grams |
| [Brief Description] | Even thought Arrow Shark SR512 Stingray Drive is a very successful product that we released it about 8 years ago, and we have received countless positive feedback from worldwide customers who have tested it, however, we have never stopped seeking the way to make each of our product better and better as we always believe that “There is no best, only Better”.
With an over decade of RC marine experience and improving technology of manufacturing, we are very proud to introduce this upgraded version of SR512 - SRD-V2 Stingray Drive to our worldwide customers. The SRD-2V was structured with various material combinations of T6 aluminium, Stainless Steel and copper, and was manufactured with precisely CNC machining and shiny exterior treatment, it is designed for industry-standard 1/4 inch shafts. The front of the drive has a unique design of screws in and out removable housing to accept a 9mm stuffing tube for the convenient maintenance, The fresh design of the prop shaft has a integral 1/4" square receptacles that directly accepts the flex shaft with 1/4"square end. This design approach means you will never again lose a prop should your flex shaft breaks. Moreover, the both end of the prop shaft were supported by a brand-new design of graphite self-lubricating copper bush along with a built-in ball bearing that integrates inside of steel pivot, this creative design delivers the engine RPM ultra-smooth via the prop shaft drag-freely transfer into prop for the superlative performance of your RC boat. A key feature of the SRD-V2 Stingray Drive is the clever design of the full angle adjustment that enables both up-and-down and side-to-side adjustment of the prop shaft angle, and so of the angle for prop thrust. This gives you unparalleled ability to tune your boat for optimum performance, with control over both the ride angle of the hull and of directional trim – which is especially useful when counter-acting the higher torque effect of today's more powerful modified engines. Different props create varying torque effects too, and now it's easy with the SRD-V2 Stingray Drive to adjust the required side-thrust angle for the best results with any particular prop. The SRD-V2 also equips a transom mounting plate that has the match bolting threads matching to the mounting base of SRD-V2, that enables you to target the installation holes on your hull transom more correct and easy than ever before, whilst offers clean and secured installation without bolt nuts and washers. The SRD-V2 Stingray Drive is visually appealing as well with a stylish elegance that will look great on the transom of your latest aquatic masterpiece. |
| [Product Dimension] | Please check the dimension picture above for the detail. |
100%
NAN%
NAN%
This site is protected by copyright and trademark laws under US and international law.
all rights reserved ©2019-2029 Arrow Shark Inc
Most helpful comments（0）
No comment-