Marine E-Starter V4_E-Starter Series_Recommend products

Specification

[Manufacturer]	Arrow Shark
[Product Weight]	860 Grams
[Product Dimension]	Please check the dimension picture above for the detail.
[Product Description]	Even thought we have very successful production of E-starter V3, but we have never stopped seeking ways to improve and make it better. That’s what we continually do for every one of our products as we always believe that “There is no Best, only Better”! Now, it is time to introduce the Arrow Shark On-board E-Starter V4 to all of our friends and customers in the big global Arrow Shark family! The E-Starter V4 was totally re-designed from the V3 only excepting that high quality gears and performance remain the same! First of all, the CNC flywheel adaptor was redesigned as a completely sealed clutch box; it now has four internal spring pawls working with four-leg spinners that make engagement in a blink. The new design also allows storing grease for smoother pawl movement. The innovative clutch box design also enables the kit to be used for counter-rotation applications with a very easy change-over which we will explain in the owner’s manual. The most revolutionary design aspect of the E-Starter V4 is the integral coupling system that works with a softer adaptor inside the coupling; during the time of engagement to start the gas engine, this clever approach effectively absorbs the impact from the electric motor passing through the gears to reach the four spring pawls inside the clutch box. With this intelligent design, the whole starting process becomes quiet instead of the more noticeable impact sound with the E-Starter V3. It also makes the whole kit even more durable. The other significant upgrade on the V4 is the integrated gear box! This protects the gears from the electric motor and the top middle gears with a full box of grease to avoid wear on the teeth of these two important gears. The V4 kit comes with a total of seven bearings which perfectly support all the gears and drive shafts in 100% alignment for optimum performance. The new 560S series high rpm electric motor turns at 18,000+ rpm with a 2S LIPO battery. Thus, for any single cylinder gas motor below 30cc, a 7.4V LIPO will be just right to start your engine within a second. The V4 Starter comes with optional of R-One control device and servo remote switch, The R-One device is designed to be fully water-proof and will continue to function even when sinking underwater, so there is no worry that the device will be damaged by any splashes of water. It has a drain hole so any water that does get in can quickly flow out. Also the R-One will supply 5.2V power from the E-Starter LIPO for your radio system. You do not need a separate battery for that. Simply turn on the power switch of the R-One and your receiver and servos will be powered from the LIPO battery. The R-One device will accept the LIPO battery up to 3S (11.1V). Please note that: if you feel the BEC 5.2V output from the R-one device is not powerful enough for your servos, and prefer to use a separate 6V battery for your receiver, you need to pull out the red wire from the receiver wire that goes to your receiver from R-one, this way, the BEC function from the R-one will be disabled, you can not use both battery power and the BEC power at the same time, it will damage the R-one device as two types of power will interfere with each other. The servo remote switch was designed with all-in-one metal gear servo with a CNC mounting plate, You can mount this on the engine rail of your hull anywhere you prefer as it comes with a generous 500mm extension receiver wire to easily reach your servo box, the servo remote switch could accept the LIPO battery up to 4S, but, you will need maximum 3S LIPO battery for your engine, as the E-Starter V4 was designed for the gas engine below 30cc. The E-Starter V4 is available in three colors - black, red and silver. It will ship to you fully assembled with just a few steps required to fit it to your engine. Thanks once again for choosing Arrow Shark products - we hope you enjoy the quality and unique design of our products.

Feedback

0%

Satisfications

1Comment
- Positive：
  
  0%
- Neutral：
  
  100%
- Negative：
  
  100%
Sharing your comment for the product you puchased, will help others to make decision on the products they plan to order

This product allows all customers to Make Comment