[Manufacturer] | Arrow Shark |
[Weight] | 170 Grams |
[Dimension] | Please check the dimension picture above for the detail |
[Brief Description] | When a gas engine RC boat idles in the water, then, the water stops flowing to the engine for the cooling, or when the boat is running at slow speed motion, the water will pick up unstably which could possibly cause the gas engine overheated! So, you will need a water pump to pump the water up to engine constantly for the cooling at anytime.
X-Pump - The extraordinarily design of billet water pump that was using the pulse of pressure from the gas engine to operate, the X-Pump is precisely CNC constructed and manufactured, it specifically designed for the massive and smooth water flowing for the engine cooling under any circumstance, when the engine revolves, the diaphragm pulsates with the pressure delivers the water to the engine at each revolution, at the middle section of the X-pump, there are two chambers, they are separated by a pair of one way valve leafs, the valve leafs insure that the water that passes through does not come back, water flows from one chamber to the other at one pulse and water flow to the engine at the next pulse. The X-Pump is not only delivers outstanding cooling ability for your engine, it also offers great appearance design and definitely raise up the value of your boat to higher level. |
100%
0%
0%
Most helpful comments(2)
Great cnc pump
X w water Pump
Is great a t.
5 starrs